Support for your Roborock F25 Pro Turbo

: Below are the main specifications of the F25 Pro Turbo for your quick reference:

1. Dimensions: Main unit: 263 × 242 × 1,104 mm (10.35 × 9.53 × 43.46 in); Drying and charging dock: 316 × 350 × 110 mm (12.44 × 13.78 × 4.33 in)
2. Net weight: Main unit: approx. 4.7 kg (10.36 lbs); Drying and charging dock: approx. 1.6 kg (3.53 lbs)
3. Battery: 21.6 V / 4,000 mAh lithium-ion battery; charging time: approx. 4 hours
4. Maximum suction power: 25,000 Pa; Maximum cleaning width: 250 mm (9.84 in)
5. Tank capacities: Clean tank (clean water tank): 740 mL; Dirty tank (dirty water tank): 720 mL (600 mL usable when lying flat); Cleaning solution refill port (compartment): 100 mL
6. Self-cleaning and drying: up to 95°C (203°F)

No, it does not consume a noticeable amount of power. When the main unit is on the charging dock, its power consumption is extremely low, which also helps keep the battery in optimal condition. Returning the main unit to the charging dock right after floor cleaning also helps prevent residual water from leaving marks on the floor. If the appliance will not be used for a long time, we recommend fully charging it, unplugging the charging dock from the power outlet, storing the unit in a cool, dry place, and recharging it at least once every 3 months to prevent over-discharging.

Routine maintenance mainly involves rinsing and air-drying components:

1. Dirty tank (dirty water tank) and filter: Clean as needed. After rinsing the filter with cold water, let it air-dry for at least 24 hours before reinstalling it.
2. Solid-liquid separator: Rinse as needed.
3. Clean tank (clean water tank): We recommend rinsing it every 2–4 weeks.
4. Roller: Clean as needed and replace it approximately every 3 months.
5. Drying and charging dock: Wipe it with a soft, dry cloth. Do not rinse the dock directly with water.

Operating noise is approximately 73 dB(A) in AUTO mode and approximately 69 dB(A) in ECO mode. During drying, the noise level is approximately 48 dB(A) in quiet drying mode. For quieter operation, you can select ECO mode for floor cleaning or set drying to quiet drying mode.

For everyday cleaning, clean water alone will work—no additional cleaning solution is needed. For stronger stain removal, add Roborock official cleaning solution into the cleaning solution refill port (compartment) on the unit, and the machine will automatically mix it at the appropriate ratio. Do not add disinfectants or other non-official cleaning solutions, as this may damage components or cause excessive foaming.

The F25 Pro Turbo features a built-in 21.6 V / 4,000 mAh high-energy-density lithium-ion battery. In AUTO mode, it delivers a runtime of approximately 40 minutes and covers approximately 300 m² (3,229 sq ft); in ECO mode, it delivers a runtime of approximately 60 minutes and covers approximately 460 m² (4,951 sq ft). Actual runtime and cleaning area will vary depending on the selected mode, floor conditions, and usage habits.

When the battery is low, place the unit back on the charging dock; a full charge takes approximately 4 hours. During cleaning, if the dirty tank becomes full or the clean tank runs low, the machine will alert you via voice prompts and screen notifications. Simply empty or refill the tank to resume cleaning.

Before first use, please complete the following setup steps:

1. Install the handle: Insert the handle into the main unit with the buttons facing the front of the unit. The handle is installed correctly when you hear a click.
2. Place the drying and charging dock: Place the dock on a hard, level surface against a wall, neatly route the power cord, and plug it into a power outlet.
3. Fill the clean tank: Remove the clean tank, open the cap of the clean tank refill port, and add room-temperature tap water (do not use water above 60°C / 140°F). Close the cap tightly and reinstall the tank.
4. Add cleaning solution as needed: Add Roborock official cleaning solution into the cleaning solution refill port, and the machine will automatically dispense it at the appropriate ratio. Clean water alone will work for everyday cleaning.
5. Connect to the app: Download the Roborock app on your smartphone and follow the on-screen instructions to add the device (2.4 GHz Wi-Fi networks only).
6. Dock and charge: Place the main unit on the drying and charging dock. When you hear the voice prompt "Charging started. Please start self-cleaning.", the unit has begun charging. For first-time use, we recommend charging it fully (approximately 4 hours) and completing one self-cleaning cycle.

Once these steps are complete, your vacuum cleaner is ready for everyday use. For further assistance, please consult the included Quick Start Guide or contact Roborock Customer Support.

The F25 Pro Turbo combines strong cleaning performance with easy operation. Its 25,000 Pa maximum suction power, together with four modes—AUTO, MAX, ECO, and Sponge—covers everyday quick washing, heavy localized messes, and water pickup. For stubborn stains, simply press and hold the Boost Trigger for targeted deep cleaning. Lower the handle to lay the unit fully flat, which makes it easy to clean under beds, cabinets, and other low-clearance furniture. After use, place the unit back on the charging dock, and 95°C (203°F) high-temperature self-cleaning plus quiet and fast drying modes will automatically complete full-chain drying. Through the Roborock app, you can also adjust the voice volume, schedule drying, or turn off automatic drying. Day to day, you mainly need to refill the clean tank and empty the dirty tank; the machine handles the rest of the maintenance automatically.

The F25 Pro Turbo delivers up to 25,000 Pa of maximum suction power, supports four cleaning modes (AUTO, MAX, ECO, and Sponge), and features a continuously rinsing roller that is suitable for a variety of floor types. With a 740 mL clean tank, it provides approximately 40 minutes of runtime and approximately 300 m² (3,229 sq ft) of coverage in AUTO mode, and approximately 60 minutes of runtime and approximately 460 m² (4,951 sq ft) of coverage in ECO mode. For stubborn stains, press and hold the Boost Trigger for boosted targeted cleaning.